Plastic Bottle Blowing Machine

Plastic Bottle Blowing Machine

Introduction KML-SV4 High speed 4cavicity PET bottle blowing machine with Stable performance with advanced PLC. Conveying preforms automatically auto-loader. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolve in the rails......

Send Inquiry Chat Now

Introduction

KML-SV4 High speed 4cavicity PET bottle blowing machine with Stable performance with advanced PLC. Conveying preforms automatically auto-loader.

Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolve in the rails simultaneously in the infrared pre heater.

High adjust ability to enable the pre heater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the pre heater with an automatic thermostatic apparatus.

High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.


Technical parameter

Model

KML-SV4

Bottle type specification

Cavity

4

Theory output

5500-6500

Max.volume

500ML-2L

Bottle mouth maximum overall diameter

28-38mm

Bottle biggest diameter

105mm

Bottle maximum height

330mm

Power specification

Light tube quantity

32pcs

Light tube power

1.5KW

Maximum heating power

48KW

All electric machine installation

52KW

Actual consumption

40%--70%

Air pressure specification

Work pressure

7-9kg/cm2

Low-pressure gas consumption

1000L/min

Blow bottle pressure

25-35kg/cm2

Higher -pressure gas consumption

3000Ltr/min

Air pressure specification

Work pressure

5-6 kg/cm2

Temperature range

10℃

Consumption

8000kcal/hr

Forzen water flow

138L/min

Machine specification

Machine size

4.1x1.6x1.9

Machine weight

3.9ton


CONFIGURATION

Components

Brand、Origin

PLC controller PLC

MITSUBISHI

Touch screen

MITSUBISHI

Cylinder

SMC, Japan SMC

Filter

TPC, Korea TPC

Magnet valve

TPC, Korea TPC

Photoelectric switch

OMRON,Japan

Contactor

Schneider,France

Proximity switch

SICK ,German SICK

Sensor

OMRON,Japan

Switch power

MEANWELL,Taiwan

Frequency converter

Mitsubishi,Japan

Main Servo motor

XINJIE CHINA

Feeding Servo Motor

XINJIE CHINA


Features:

1.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

2. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

3. Strong clamping force with high pressure and double crank links to lock the mold.

4. Two ways of operating: automatic and manual.

5. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

6. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.

7. Contamination is avoided for the bottle body.

8. Ideal effect of the chilling with the chilling system.

9. Easy installation and starting

10. Low rejection rate: less than 0.2 percent.



Hot Tags: plastic bottle blowing machine, suppliers, manufacturers, price, for sale