Carbonic Acid Beverage Filling Machine

Carbonic Acid Beverage Filling Machine

Introduction project description Basic requirements: Production: Carbonated beverage. PET Bottle:0.5L-18000 b/h, 1.0L-12000 b/h, 1.5L - 6000 b/h Whole line capacity:18000B/H take 0.5L for standard carbonated beverage: CO2 content ≧3.5 PET bottle bottle unscrambler: automatic bottle unscrambler......

Send Inquiry Chat Now

Introduction

project description 

Basic requirements:

Production: Carbonated beverage.

PET Bottle:0.5L-18000 b/h, 1.0L-12000 b/h, 1.5L - 6000 b/h

Whole line capacity:18000B/H take 0.5L for standard

carbonated beverage: CO2 content ≧3.5

PET bottle

bottle unscrambler: automatic bottle unscrambler

cap sterilizer : adopt bottle cap cleaning and sterilization

trademark: PVC hot shrinking trademark, adopt automatic sleeve labeling machine.

imprinting form: ink jet

automatic film wrapping machine: wrap 20 pack/min

Manual lift stack and put into storage


细节图4


carbonated beverage productive technology:

Pure water carbon dioxide

↓    ↓

Refrigerating system filter bottle cap

↓   ↓     ↓

Carbonated beverage mixer cap uploading

↓      ↓

Ended bottle → bottle unscrambler → air conveyor→ XGF3 in 1 filling machine ← cap cleaning and sterilizer

Lighter checker

Bottle body dryer

Ink jet

Sleeve labeling

Shrinking film→ hot shrinking labels

Automatic film wrapping machine

End product conveying

Manual lift stack and put into storage


DXGF50-50-12 isobaric 3 in 1 monoblock filling machine, based on the introduction, digestion and absorption of Italy, Germany advanced technology, according to the technological requirements of carbonated beverage processing, innovated and developed an advanced filling equipment, mainly for cola, soft drinks, sparkling wine, mineral water and other gas production of PET bottled beverage, the it is an ideal equipment of medium and large beverage plant .


Main features: 

1) compact structure, perfect control system, easy operation, high automation, low labor intensity. 

2)  parts contacting with materials are made of food grade quality stainless steel, corrosion-resistant, easy to clean. 

3) washing system using our unique flip-style bottle holder, bottle stuck in the bottleneck parts, the folder could avoid the contaminated damage of the screw thread of  traditional rubber bottle clip  on the bottle neck.

1

4)  rinser with the country exclusively for efficient use of special spray nozzles, spray bottle in the set the angle, can be washed into the wall of any part of the bottle, rinse thoroughly and rinsing water conservation. 

5) adopt high efficient bottle cap management system, with a sound grasp cap technology and protection devices; failing cap rail equipped with anti-rail cap, anti-rail cap will be removing by taking out device. Meanwhile with cap testing organizations, used to control the start and stop.

6) filling machine using German technology, high accuracy, high speed automatic filling quantitative filling valve, liquid level accurately without loss, no bottle ,valve will be closed in time, so as not to drain fluid, to ensure good filling quality; matching with mixing machine can realize disinfection cycle, with opening valve, drainage ,and cleaning and function. Precise filling volume, low failure rate, to ensure product quality, reduce losses , providing a reliable hardware protection. 


Technical parameters: 

Model: DXGF50-50-12 

Station: Washing 50,filling 50, capping 12 

Production capacity: 18,000bottles / hour (500ml / bottle) 

Air pressure: 0.7MPa 

gas volume: 0.3M3/min 

Filling method: isobaric 

Rated voltage: 380V 

Power: 11KW 

Weight: 10000Kg 


After-sales service 

(1) We can dispatch our engineer(s) to your side for installing and debugging machines, but our engineer(s) traveling allowances (USD120/day/person), as well as lodging and board expenses, shall be charged at your side. 

(2) The machine quality that we sell is guaranteed 1 year.

(3) We shall provide your side spare accessories for easy-damaged parts within warranty year and long time technical support.


FAQ

Q1:Can we trust you?

Q1:Of course you can, we have more than 10 years of filler manufacturing experience, has been walking in front of the industry. The mechanical parts We use are also produced by major international companies, with the careful creation of engineers and workers, so the quality of the equipment can be assured.

Q2: Are you a trading company or a manufactory?

A2: We are a manufactory, we supply the factory price with good quality, welcome to visit !

Q3: What is your guarantee or the warranty of the quality if we buy your machines?

A3: We offer you high quality machines with 1 year guarantee and supply life-long technical support.

Q4: How can I install my machine when it arrives?

A4: If need we will send our engineers to your factory to install the machines and train your staff how to operate the machines.

Q5:What is the payment method?

A5:You can use L/C, T/T, D/P to pay for your purchase.


Hot Tags: carbonic acid beverage filling machine, suppliers, manufacturers, price, for sale
Related Products