Stretch Sleeve Labeling Machine

Introduction This stretch sleeve labeling machine adopt LCD touch screen control the whole process:bottle carrying, bottle separation, material carrying, clean down, label cutting, label sleeve and shrink. The operation is very convenient. in order to increase the efficiency and based on the......

Send Inquiry Chat Now

Introduction

This stretch sleeve labeling machine adopt LCD touch screen control the whole process:bottle carrying, bottle separation, material carrying, clean down, label cutting, label sleeve and shrink. The operation is very convenient.  in order to increase the efficiency and based on the mechanical structure, circuit design, intelligent control, use electrical appliance control system, which is important to label sleeve machine for beverage, we have developed advanced electrical appliance. 

material feeding buffer unit is designed to control the label, buffer the label feeding process and avoid curved label and label obstruction. Label cutting place is controlled by photo electricity and human machine in order to check the label cutting place and enable the cutting more accurate. In order to balance the inertial forces to make the label casting more precisely and stably in the label feeding process, adopt Auto tension device of label feeding unit, in order to avoid unsteady, low speed and label obstruction in the feeding process of hot shrinking label sleeve and make the process fluent and feeding label swiftly, our company new developed Double drive unit, this KML-350 This stretch sleeve labeling machine can reach 350bottles/minute speed, more faster than common machine.

细节图1


Technical parameter

Model

KML-350

Capacity

20000BPH(Label height≤100 mm)
20000BPH(label length≤100 mm)
18000BPH(Label height≤250 mm)
18000BPH(label length≤100 mm)

Percent of pass

≥99.9%

Whole line productive efficiency

≥95%
According to 24 hours

Applicable diameter of bottle

Æ28mm ~Æ 125mm

Applicable length of label

30mm ~250mm

Applicable thickness of label

0.027mm ~0.13mm

Label material

PVC、PET、OPS

Internal diameter of paper tube

≥4"(101.6mm)

Outside diameter of paper tube

≤500mm

Voltage

AC380V,50/60HZ,3phase

Input power of label sleeve machine

6KW

Input power of shrinking tunnel

1.5KW

Pressure of steam source

1-8Kg/cm2

Consumption of steam

<50Kg/hour

Outside dimension

Sleeve label main machine:L2100*W1100*H2000
Shrinking tunnel:L2300mm*W500mm*H1500mm

Total weight

1000 kg


Technical Features and application :

1.This stretch sleeve labeling machine adopt Synchronized transmission and drive by gear with one belt. The change of transmission belt will be finished quickly. Compared to the type of traditional multilayer whose change and maintain need more than six hours, its maintenance is easy and maintain is simple, so it doesn’t influence production.

2.Cutter head original transducer is inside the cutter head and when you take down cutter head, no need to correct the synchronous belt. It also has unique light touch human-machine screen, that means, auto search original location as well as safety and convenience which is ahead of other congener products. The new design of cutter adopt step motor with high speed, stable and exact movement, trim cut place and perfect shrink. Compatible with the label synchronous location structure, the error of cutting place is within 1mm.

3.adopts rotary potentiometer which enable the label feeding stable and fluent and avoid the error label length, label block and other problem when label feeding servo convey the label.

4.Inhibiting device on the screw mandrel effectively control the fault operations and ensures the safety of the center pillar.

5.Adopted with mechanical transmission to drive the positioning belt on both sides. While changing the whole bottle carrying unit, the down and up, width are all controlled by one hand wheel aiming to synchronously and swiftly adjust.

6.adopt motor to up and down which enable the operation more convenient.

7.New hot air shrinking tunnel: It adopts high pressure blower machine. Special designed hot air circle tunnel saves more energy and make the shrink bottle more beautiful. Compare with the traditional shrinking tunnel, this kind of tunnel can do better for curved bottle.( optional).


After sales service

1 can dispatch engineers to end user’s plant to install, debugging machine unit start normal production. And teach end users’ worker to operate machine.

2 quality guaranty time is 1 year, easy wear spare parts free, life long time provide technical support if happen problem.

3 also can provide turn-key service even your machine not buy from us. Also can dispatch engineers to solve professional problem.


FAQ:

Q1: if your company are manufacturer?

Yes, Suzhou Shunxing Beverage Packaging Machinery Co., Ltd establish own factory since 2012. Already design, process, install, and debugging packing machine More than 20 years, with rich experience on oil bottle filling, capping, labeling and packing machine. one engineer can install and debugging whole production line, to save cost and time for end customers.

Q2: What’s your company advantages?

Work with us, make your business easy, our engineers team making and debugging machine more than 20 years, go around more than 30 countries to install and debugging machine. One engineer can finish whole line, to save your time and money.


Hot Tags: stretch sleeve labeling machine, suppliers, manufacturers, price, for sale
Related Products