Home > News > Content
Analysis Of The Reasons For Inaccurate Or Non-discharge Of Filling Capacity Of Beverage Filling Machine
Dec 29, 2018

Filling machines are mostly widely used in food, medicine, daily industry, because of the variety of products produced, but if there is a failure in production, it will bring about the impact of production can not be underestimated. Therefore, enterprises need to know more about the possible situation of machinery and how to deal with the knowledge. Can ensure that the filling machine more efficient, high-quality, low-cost completion of production. 

Beverage Filling Machine Installation precautions: 

1, after the machine opened the box, first check whether the random technical information is complete, the machine in transit is damaged, in order to solve in a timely manner. 

2, the Feed assembly and discharge components according to the form diagram in this manual installation and adjustment. 

3, the lubrication points will be new lubricants. 

4, use the rocker handle to rotate the machine, check whether the machine is operating in the correct direction (facing the motor spindle is counterclockwise), the machine must protect the grounding. 

The reason analysis of the filling capacity is not allowed or not to discharge: 

1, speed throttle valve and filling interval throttle valve is not closed, throttle valve can not be closed. 

2, fast install three-in-three control valve is not a foreign body, if there is, please organize, quick three-in-three control valve and filling head of the leather tube is not there air, if there is air, try to cut or clean the air.

3, to see if all seals are damaged, if there is damage, please replace the new. 

4, filling mouth valve core whether there is a plug appearance or delay open, if there is a Kasey, to the valve core from the beginning to install a good position. If the delay is opened, the thin cylinder throttle valve should be adjusted. 

5, fast loading three-size control valve in the upper and lower tightening spiral spring elasticity, elastic too large check valve will not open. 

6, filling speed is not too fast, adjust the filling speed throttle valve, drop filling speed. 

7, all the clamp, leather pipe buckle can be sealed well, such as Please fix. 

8, magnetic switch is not loose, each time the amount of adjustment, please lock.

Related News