Home > News > Content
Correct Use And Maintenance Knowledge Of The Filling Machine
Jan 14, 2019


The filling machine plays an important role in the current processing industry. It is one of the necessary equipment for the production and processing of many food, beverage, medicine and daily chemical enterprises, and plays an increasingly important role in our life. For the enterprise, the use of the filling machine is not a problem, but in its maintenance and maintenance, few people know.


First, before using the filling machine, brushing machine and bottle washer,

1. Install and then debug, read the instructions carefully before commissioning, and prepare the tools used.

2. After the installation, brushing machine and the rinsing machine are installed, the filling track and the bottle receiving tray are leveled, the liquid storage tank is filled with materials, and all the electrical switches are in the closed position.

3. Fill the container into the tool box, connect the external power supply, the power socket must be a three-pin socket, and have a reliable grounding wire to prevent the chassis from leaking power, turn the machine power switch to ON, and the power indicator light.

4. The mounting support plate holds the filling frame and points to the positioning sleeve on the top filling head. The positioning sleeve should be able to move up and down flexibly, and the filling needle is exposed or retracted without hindrance.

5. The switch under the liquid storage tank is turned to the open position, so that the material can flow into the total metering pump. According to the total filling amount of each container, adjust the screw on the crank and rotate the knob of the filling speed control board to 20 degrees. Left and right, then turn the switch on the filling speed control board to the open position.

6. When the filling head out of the liquid is the set amount, screw the liquid amount fine-tuning nut, cover the filling head housing, and loosen the filling bracket support plate.

Pay attention to its maintenance after the filling machine is used. When removing and disassembling the piston during maintenance, remove the fixing screws at the same time to avoid affecting the other process requirements when disassembling. Before the piston filler is cleaned, the remaining product should be removed and the tank filled with a mild cleaning solution. The cylinder has been lubricated at the factory. Please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic. In addition, while maintaining and properly using the filling machine, it is necessary to conduct regular inspections and commissioning. Only such a filling machine can work healthily and steadily.


With the continuous improvement of living standards, the demand for beverages and daily chemical products is increasing, the company is developing continuously, and the use of beverage filling machines, brushing machines and bottle washing machines is increasing. The filling machine is in use. The problems that should be noted are also increasingly sharp. Therefore, for the better production of the enterprise, it is still necessary for its maintenance work.

Related News